20 ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
➍ If the program you want is not displayed, press PGM
until it appears.
➎ Press ñ or ò to set the length of time you want the
station to run. Repeat steps 2 - 5 for all stations. If you do
not want to include a station in the program, set the run time
to zero.
➏ After you have set the run time for the last station, turn the
dial to AUTO.
NOTE: You can use the Water Budgeting feature to
set watering times of less than one minute. For
example, if you set a station watering time of one
minute and adjust Water Budgeting to 50 percent,
the station will run for 30 seconds. See page 23 for
instructions on setting the Water Budget.
To Next Page
Loading...
Need help?
General
