Need help?Do you have a question about the Rain Bird ESP-ME3 and is the answer not in the manual?
General| Display | Backlit LCD |
|---|---|
| Seasonal Adjust | Yes |
| Controller Type | Modular |
| Start Times | 4 per program |
| Master Valve/Pump Start | Yes |
| Electrical Output | 24 VAC |
| WiFi Capability | Optional (with LNK2 WiFi Module) |
| Programming Schedules | 3 independent programs (A, B, C) |
| Enclosure | Indoor/Outdoor |
| Watering Schedule | Days of the week, odd, even, or cyclical (1-30 days) |
| Sensor Input | 1 sensor input |
| Operating Temperature | Up to 149°F (65°C) |
| Enclosure Rating | NEMA 3R |
| Zones | 4-22 (with modules) |
| Electrical Input | 120 VAC |
Welcome message and overview of the Rain Bird ESP-ME3 controller and its features.
Detailed list of the ESP-ME3 controller's capabilities, including station capacity and supported functions.
Information on connecting the ESP-ME3 controller to a network via the LNK WiFi Module for remote access.
Step-by-step instructions for securely mounting the ESP-ME3 controller on a wall.
Procedure for routing and connecting wires from irrigation valves to the controller terminals.
Instructions for connecting an optional master valve or pump start relay to the controller.
Guide for connecting an optional pump start relay to the ESP-ME3 controller's terminals.
How to install and connect a flow sensor to the ESP-ME3 controller for monitoring water flow.
Instructions for connecting an optional weather sensor (rain/freeze) to the controller.
Procedure for connecting the ESP-ME3 controller to a 120VAC power source.
Steps for directly wiring the controller for outdoor installation, including safety precautions.
Guide on how to install optional station expansion modules to increase zone capacity.
Explanation of how station numbers are assigned with base and expansion modules.
Completing the controller installation by reconnecting the panel and applying power.
Overview of the controls and features on the ESP-ME3 controller's front panel.
How to operate the controller in AUTO mode for automatic watering schedules.
Using the OFF mode to disable automatic irrigation and cancel watering.
Explanation of various symbols and messages displayed on the ESP-ME3 controller screen.
Instructions for setting the current date, time, and time format on the controller.
How to set up to six start times for each watering program.
Procedure for assigning watering durations (run times) for each station in a program.
Methods for setting specific days or intervals for watering to occur.
Identifying and avoiding the common mistake of setting duplicate start times in a program.
How to initiate a test run for all programmed stations to check functionality.
Instructions for manually running one or multiple stations in sequence.
How to start and manage manual watering for a selected program.
Setting watering schedules to occur only on odd or even numbered days of the month.
Configuring watering to occur at specific intervals, such as every 2 or 3 days.
Functions for saving current settings and restoring them later.
Setting delays between station watering cycles to ensure valve closure.
Enabling or disabling the flow sensor for individual stations.
Procedure to erase all programmed schedules and reset the controller to factory settings.
Configuring stations to obey or ignore the connected rain sensor.
Setting the controller to use odd or even days for watering schedules.
Assigning control of a master valve or pump start relay to a specific station.
How to use the reset button to troubleshoot controller issues.
Information about the accessory port and compatible external devices.
How the ESP-ME3 detects and reports programming or electrical errors.
Identifying programming errors based on blinking ALARM LED and display messages.
Identifying electrical errors via solid ALARM LED and specific error messages.
Understanding and resolving high or low flow alarms when using a flow sensor.
Diagnosing and fixing common problems like no watering, no AC message, or too much irrigation.
Troubleshooting electrical problems indicated by a solid illuminated ALARM LED.
Information regarding FCC compliance and Canadian ISED regulations for the device.
Important safety instructions, warnings, and precautions for controller installation and use.
To Next Page
