Need help?Do you have a question about the Rain Bird ESP and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Weather Sensor Compatibility | Yes |
| Cycle and Soak | Yes |
| Sensor Input | Yes |
| Weather Resistance | Yes |
| Type | Modular |
| Zones | 4 to |
| Application | Residential |
| Mounting | Indoor or Outdoor |
| Watering Start Times | Multiple |
| Model | ESP |
A list of steps to follow for basic controller programming.
Instructions on how to set the controller's current date.
Instructions on how to set the controller's current time.
How to choose between watering programs A, B, or C.
How to set up to four start times for each watering program.
Explains the four available watering cycle options for each program.
Describes advanced watering cycle settings beyond basic weekly programming.
Details how to set up a cyclic watering schedule with a defined interval.
How to set the duration each valve will run for a selected program.
How to configure the controller for automatic operation.
How to adjust watering run times by a seasonal percentage.
How to manually start programs or advance through stations.
How to run a built-in test program for all valves.
How to reset the controller's microprocessor in case of display issues.
How to disable watering on specific days of the week.
How to program the pump or master valve operation.
How to set a delay between station activations.
How to use the auxiliary terminal for other equipment.
How to erase all programmed information from the controller's memory.
Recommendations for choosing a suitable installation site for the controller.
Instructions on how to physically mount the controller unit.
Details on how to route valve wires into the controller cabinet.
Steps for mounting the controller unit to a wall.
General instructions for connecting field wires to the controller.
Specific wiring instructions for master valves or pump start relays.
How to jumper unused stations to prevent pump damage.
Instructions on connecting the power transformer to the controller.
Specific transformer connection details for the ESP-4Mi model.
Specific transformer connection details for the ESP-4M model.
Instructions for programming the controller with the faceplate disconnected.
Guidance on how to install optional expansion modules into the controller.
Instructions for wiring and configuring a rain sensor.
To Next Page
