Need help?Do you have a question about the Rain Bird ESP-7ME3 and is the answer not in the manual?
General| Number of Zones/Stations | 7 |
|---|---|
| Enclosure | Indoor/Outdoor |
| Programs | 4 |
| Watering Start Times | Up to 4 per program |
| Water Budget | Yes |
| Seasonal Adjust | Yes |
| Rain Sensor Compatibility | Yes |
| Cycle and Soak | Yes |
| Rain Delay | Yes |
| Display Type | LCD |
| Wi-Fi Compatible | No |
| Enclosure Material | Plastic |
| Power Source | AC |
| Voltage | 24V |
Contact Rain Bird for assistance with the ESP-ME3 controller and its operation.
Introduction and overview of the ESP-ME3 controller manual.
Rain Bird's commitment to developing water-efficient products.
Detailed list of features and specifications of the ESP-ME3 controller.
Information about connecting the ESP-ME3 controller remotely via WiFi.
Step-by-step instructions for physically mounting the ESP-ME3 controller.
Guide for wiring irrigation valves to the controller's base module.
Instructions for connecting an optional master valve or pump start relay.
Instructions for wiring an optional pump start relay to the controller.
Guide for installing and wiring an optional flow sensor to the controller.
Instructions for connecting an optional weather sensor to the controller.
Procedures for safely connecting the controller to a power source.
Details on wiring the controller for outdoor use with direct electrical connections.
Information on adding expansion modules to increase station capacity.
Step-by-step guide for physically installing station expansion modules.
Explanation of how stations are numbered when using expansion modules.
Final steps to complete the controller installation process.
Overview of the controller's buttons, dial positions, and display elements.
Explanation of the various symbols and messages shown on the controller display.
How to set the current date and time on the controller.
Instructions for setting up to six start times for each watering program.
How to configure the duration for each station's watering cycle.
Guide to selecting specific days for watering or using custom day options.
Highlights a common mistake in setting start times that leads to excessive watering.
How to manually test all programmed stations for functionality.
Procedure to manually water a single station or multiple stations sequentially.
Setting watering schedules based on odd or even days of the month.
Configuring watering to occur at specific intervals (e.g., every 2 days).
How to reset the controller to factory defaults or perform a soft reset.
Information on connecting external devices like the LNK WiFi Module.
General guidance for diagnosing and resolving issues with the controller.
Explains how the controller detects and reports programming or electrical errors.
Details on errors indicated by a blinking ALARM LED and display messages.
Information on errors indicated by a solid ALARM LED, such as wiring shorts.
To Next Page
