Rain Bird ESP-RZXe User Manual

English
Rain+Birdt
ESP-RZXe Controller
Installation Guide and Operations Manual
AM
MD
YYYY
AM
MD
YYYY
LNK WiFi
Ready
* sold separately

Rain Bird ESP-RZXe Specifications

General

Zones	4, 6, or 8
Enclosure	Indoor/Outdoor
Start Times per Zone	6
Manual Watering	Yes
Delay Between Zones	Yes
Sensor Compatibility	Yes
Transformer Output	24 VAC
Pump/Master Valve Output	Yes
Voltage	24 VAC
Watering Start Times	6 per zone
Cycle + Soak	Yes
Sensor Input	1
Enclosure Rating	NEMA 3R
Wi-Fi Connectivity	Optional, with LNK2 WiFi Module
Programming	Zone-based
Display	Large LCD display
Power Source	24V AC transformer
Weather Sensing	Yes, via optional WR2 Wireless Rain Sensor or wired rain sensor
Remote Compatibility	Yes, with optional WiFi module
Station Output	24 VAC 650mA
Station Run Time	1 to 199 minutes
Backup Battery	No
Weight	680 g

Summary

Introduction to ESP-RZXe Controller

ESP-RZXe Controller Features Overview

Details the advanced water management capabilities of the ESP-RZXe controller.

LNK WiFi Enabled Functionality

Explains the remote connection capabilities using the LNK WiFi Module.

Understanding Controls and Indicators

Key Functions of Controller Buttons

Describes the primary functions of the controller's buttons.

Normal Operation Modes

Automatic Watering Mode

How the controller operates automatically based on programmed schedules.

Turning the Controller Off

Procedure to cancel active watering and disable automatic irrigation.

Basic Programming Procedures

Setting the Date and Time

Instructions for setting the current calendar date and time of day.

Configuring Zone Schedules

Creating customized irrigation schedules for specific zones.

Setting Watering Run Times

Defining the duration of watering for each zone.

Setting Watering Start Times

Establishing the specific times watering will begin.

Selecting Watering Start Days

Choosing days or intervals for watering to occur.

Additional Watering Features

Manual Watering Operations

Starting watering immediately for all zones or a single zone.

Watering a Single Zone Manually

Initiating manual watering for one specific zone.

Seasonal Watering Duration Adjustment

Adjusting watering duration based on seasonal conditions.

Controller Installation Guide

Indoor Model Installation

Steps for mounting and connecting power for the indoor unit.

Outdoor Model Installation

Steps for mounting and connecting power for the outdoor unit.

Power Wiring Connections

Detailed instructions for connecting power supply wires.

Wiring Connections for Zones and Accessories

Connecting Zone Valves

Procedure for connecting valve wires for each watering zone.

Connecting a Master Valve

Instructions for connecting an optional master valve.

Connecting a Pump Start Relay

Guide for connecting an optional pump start relay.

Connecting a Rain Sensor

Procedure for connecting an optional rain sensor.

Controller Options and Features

Installing Backup Batteries

How to install batteries for date and time backup.

Using the Reset Button

Instructions for resetting the controller to its default state.

Rain Sensor Bypass Configuration

Setting the controller to obey or ignore the rain sensor.

Troubleshooting Common Issues

Understanding Error Detection

How the controller detects and reports zone output errors.

Resolving Watering Issues

Diagnosing and fixing problems with watering functions.

Addressing Electrical Issues

Troubleshooting common electrical problems with the controller.

Programming Chart for Schedule Planning

Important Safety Information and Compliance

FCC Part 15 Compliance

Information regarding the device's compliance with FCC regulations.

Electronic Waste Disposal Guidelines

Instructions for the proper disposal of electronic waste.

Declaration of Conformity Statement

Statement of compliance with European Directives.

Technical Support Information