EasyManua.ls Logo

Rain Bird ESP-MC - User Manual

Rain Bird ESP-MC
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operations Guide
ESP-MC, ESP-SAT, ESP-SITE-Satellite and Maxicom
2
Interface Board (MIB) Kit
P/N 634593 REV F

Table of Contents

Other manuals for Rain Bird ESP-MC

Question and Answer IconNeed help?

Do you have a question about the Rain Bird ESP-MC and is the answer not in the manual?

Rain Bird ESP-MC Specifications

General IconGeneral
MountingIndoor/Outdoor
Watering Start TimesUp to 6 Start Times per Program
Cycle and SoakYes
Rain DelayYes
Rain Sensor CompatibilityYes
Weather Sensor CompatibilityYes
DisplayLCD
TypeModular
StationsUp to 12 stations (expandable)
Programs4 Programs
Sensor Input1
Battery BackupYes
EnclosureWeather-resistant

Summary

Safety Information

Warning and Cautionary Statements

Highlights important warnings and explains cautionary symbols for user safety.

Controller Faceplate Overview

Faceplate Indicators and Control Keys

Faceplate Dial Functions: Day Cycles

Faceplate Dial Functions: Operation and Settings

RASTER Rapid Station Test Routine

RASTER Operation and Initialization

RASTER Test Procedure

Steps to initiate and perform the RASTER™ test sequence.

RASTER Master Valve Testing

RASTER Station Valve Testing

Station Valve Test Procedure and Results

Procedure for testing station valves and interpreting OPEN/SHORT indications.

Troubleshooting RASTER Valve Circuits

Diagnosing Open Valve Circuits

Identifying and resolving causes of open circuits in valve wiring.

Troubleshooting RASTER Valve Circuits (Continued)

Diagnosing Short Valve Circuits

Identifying and resolving causes of short circuits in valve wiring.

Troubleshooting Open;Short Circuit Issues

Step-by-step guide for troubleshooting identified open or short valve circuit problems.

Programming the Controller: Initial Setup

Setting the Controllers Time and Date

Setting Up Programs: Selection and Cycle

Operating the Controller: Introduction

Controller Operation Modes

Manual Station Control and Test Program Usage

Running a Test Program

Performing a test cycle for all stations and setting test duration.

Troubleshooting Guide

General Troubleshooting Steps

Common issues and solutions for basic controller operation problems.

Troubleshooting: Operation and Schedule Issues

Stations;Valves Not Activating

Diagnosing why stations or master valves fail to activate.

Program Schedule Execution Failures

Troubleshooting reasons for the controller not following the programmed schedule.

Troubleshooting: Station and Timing Problems

Station Activation Failures

Specific troubleshooting for individual station activation issues.

Unexpected Station Activation Issues

Resolving instances where stations activate at unintended times.

Troubleshooting: Time, Display, and Maxicom² Issues

Watering Time Discrepancies

Addressing differences between programmed and actual watering times.

Maxicom² System Integration Issues

Troubleshooting problems when the controller is linked to the Maxicom² system.

Appendix C: Setting the Channel Number

Related product manuals