Rain Bird WR2RFC-48 User Manual

Contents
EN
ES
page 11
Safety Information ................................ 1
Introduction ........................................... 1
WR2 Components ................................................................ 2
WR2 Benefits ........................................................................... 2
Mounting the Controller Interface ......... 2
Wiring the Controller Interface to the
Irrigation Controller .............................. 3
Initial Power Up ..................................... 4
Controller Interface Display Icons ................................4
Sensor Status .....................................................................4
Environmental Conditions ........................................... 4
Irrigation Modes ...............................................................5
Synchronize the Sensor and Controller
Interface ................................................ 5
Programming the Set Points .................. 6
Rainfall Set Point ................................................................... 6
Temperature Set Point
(Rain/Freeze Sensor only) ................................................. 6
Programming Irrigation Modes ............. 6
Saving, Resetting and Restoring
Settings .................................................. 7
Save Contractor Default Settings ................................. 7
Reset Contractor Default Settings ...............................7
Restore Contractor Default Settings ........................... 7
Restore Standard Setting ..................................................7
Select the Sensor Location ..................... 7
Sensor Mounting Instructions ............... 8
Using Multiple Controller
Interface Units ....................................... 8
WR2 Wireless Sensor Alerts &
Troubleshooting .................................... 9

Rain Bird WR2RFC-48 Specifications

General

Brand	Rain Bird
Model	WR2RFC-48
Category	Accessories
Language	English