RAISE 3D Pro2 Series - C. ideaMaker Installation; Windows Installation Guide

Pro2-Series 3D Printer / Quick Start Guide
C. ideaMaker Installation
Open the installer and choose your preferred language. Select the installation location
for ideaMaker, and click "Next".
1
The ideaMaker slicing software is
available on the USB storage drive
included with your printer.
Additional downloads and versions
are available online at:
www.raise3d.com/
pages/download
www.raise3d.com
Download ideaMaker
WINDOWS
01 02
03 04 05 06
07
08 09 10
11 12 13 14
15 16 17 18
19 20 21 22
23 2624 25