Raisecom ISCOM2624G-4C-PWR-AC User Manual

Raisecom
ISCOM2600G (A) Series Product Description
4 Device installation
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
48
4 Device installation
This chapter describes how to install the ISCOM2600G series switch, including the following
sections:

Installing hardware

Installing software
4.1 Installing hardware
The ISCOM2600G series switch adopts a 1U cartridge structure. It can be easily installed in
the following scenarios of a telecom equipment room:

Cabinet

Workbench
4.1.1 Preparing for installation
Environment conditions
Table 4-1 lists requirements on the operation environment of the ISCOM2600G series switch.
Table 4-1 Requirements on operation environment
Parameter
Description
Operating temperature (altitude 0–1800 m)
0–50°C
Operating humidity
10%–90% RH (non-condensing)
Storage temperature
-25 to 60°C
Air pressure
86–106 kPa

Raisecom ISCOM2624G-4C-PWR-AC Specifications

General

Model	ISCOM2624G-4C-PWR-AC
Ports	24
Uplink Ports	4
Power over Ethernet	Yes
Power Supply	AC
Switching Capacity	128 Gbps
MAC Address Table	16K
VLAN Support	Yes
Jumbo Frame Support	Yes
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Type	Switch
Operating Temperature	0°C to 50°C