Need help?Do you have a question about the Raisecom RC1201-2GE16E1T1 and is the answer not in the manual?
General| Category | Network Hardware |
|---|---|
| GE Ports | 2 |
| E1 Ports | 16 |
| T1 Ports | 1 |
| Management | CLI, WEB, SNMP |
| Power Supply | AC 100-240V, 50/60Hz |
| Device Type | Access Gateway |
| Type | TDM over IP |
| Interface | Ethernet, E1, T1 |
| Dimensions | 440mm x 44mm |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
Overviews the product and outlines the manual's objectives.
Details conventions for text, commands, GUI, keyboard, and mouse usage.
General introduction to the product and its purpose.
Describes typical network scenarios and applications.
Details supported service types, PSN, and encapsulation protocols.
Lists available product models and configurations.
Details the device's hardware components like chassis, backplane, and modules.
Covers service, management, optical, E1/T1, T1, Ethernet, console, and SNMP interfaces.
Describes LEDs on various modules and types of fiber/cables used.
Explains the Raisecom Operating System (ROS) and its software modules.
Details TDMoP services, PWE3, and Ethernet service capabilities.
Covers QoS features including priority, classification, policy, and rate limiting.
Describes link aggregation, storm control, and routing functions.
Explains management via Console, Telnet, and NView NNM.
Lists diagnostic tools like PING, SFP monitoring, and port mirroring.
Details EFM OAM functions for interconnected Ethernet devices.
Lists key product, main control card, and subcard specifications.
Covers optical interface parameters, laser safety, and reliability.
Details EMC, security standards, and environmental conditions.
Guides on selecting location, safety statements, symbols, and electrical/radiation safety.
Covers tool preparation, installation conditions, procedure, and chassis mounting.
Details connecting grounding, power, service cables, and post-installation checks.
Explains procedures for upgrading BootROM and system software.
Guides on installing the NView NNM software.
Lists relevant standards, protocols, terms, and abbreviations.
To Next Page