Raisecom RC1201-2GE16E1T1 User Manual

Raisecom
RC1201-2GE16E1T1 Product Description
7 Installing and upgrading software
Raisecom Technology Co., Ltd.
81
7 Installing and upgrading software
The RC1201-2GE16E1T1 is installed with all necessary software before delivery so that it
can be powered on immediately after hardware installation is complete.
The BootROM and system software can be installed and upgraded through Command Line
Interface (CLI). You can upgrade RC1201-2GE16E1T1 through both the BootROM and
system software. For details, see RC1201-2GE16E1T1 Configuration Guide (P100R001_01).
This chapter includes the following sections:

Upgrading BootROM

Installing and upgrading system software

Installing and upgrading NView NNM software
7.1 Upgrading BootROM file
The BootROM file, installed before delivery, is a guidance program for the RC1201-
2GE16E1T1, designed to initialize the RC1201-2GE16E1T1.
After the RC1201-2GE16E1T1 is powered on,
Step 1 Execute the RC1201-2GE16E1T1 file.
Step 2 When the RC1201-2GE16E1T1 prompts "Press space enter Bootrom menu…", press Space.
Then you enter the BootROM menu and upgrade the BootROM file as prompted.
You can upgrade the BootROM file through both serial port and Trivial File Transfer
Protocol (TFTP).
7.2 Installing and upgrading system software
The files (system software and configuration file) mandatory in operation of the RC1201-
2GE16E1T1 is saved in the memory. By default, the RC1201-2GE16E1T1 prompts you to
confirm the operations which may result in data loss, such as deleting files and overriding
files.

Raisecom RC1201-2GE16E1T1 Specifications

General

Brand	Raisecom
Model	RC1201-2GE16E1T1
Category	Network Hardware
Language	English