Raisecom RC1201-2GE16E1T1 User Manual

Raisecom
RC1201-2GE16E1T1 Product Description
2 System structure
Raisecom Technology Co., Ltd.
13
Parameter
Description
Duplex mode

Supporting 10/100/1000 Mbit/s automatical negotiation

Supporting half/full duplex automatical negotiation
Flow control

Supporting IEEE 802.3x flow control in full duplex

Support back pressure flow control in half duplex
Data frame length
1632 Bytes
Line order
Supporting auto MDI/MDIX
Cable specifications

In 10/100 Mbit/s duplex mode, Category 5 unshielded twisted
pair is recommended, or Category 5 shielded twisted pair is
recommended if high Electromagnetic compatibility (EMC) is
required by the working environment.

In 1000 Mbit/s duplex mode, Super 5 shielded twisted pair is
recommended.
Compliance standard
IEEE 802.3
Frame format

Ethernet-II

Ethernet-SAP

Ethernet-SNAP
Network protocol
IP
Console interface parameters
Table 2-7 lists Console interface parameters.
Table 2-7 Console interface parameters
Parameter
Description
Connector type
RJ45
Duplex mode
Duplex mode UART
Electrical features
RS-232
Bit rate
9600 bit/s
Cable specifications
8-wire cable
SNMP interface parameters
Table 2-8 lists SNMP interface parameters.

Raisecom RC1201-2GE16E1T1 Specifications

General

Brand	Raisecom
Model	RC1201-2GE16E1T1
Category	Network Hardware
Language	English