Rajant BreadCrumb ES1 User Manual

Code Firmware Upgrade Codes (1*)
386 Radio(s) warming up.
387 High internal temperature detected.
388 Low input voltage detected.
389 High input voltage detected.
Code FIPS Codes (4*)
41 FIPS Power-on self-tests failed.
411 FIPS DRBG power-on self test failed.
412 FIPS DRBG continuous test failed.
413 FIPS DRBG health check failed.
414 Kernel integrity check failed.
415 Filesystem integrity check failed.
417 FIPS Invalid configuration.
421 Default password in use
Code Fatal and Serious Codes (5*)
51 Internal error, system will restart.
52 hostapd fatal error.
521 HT40 bandwidth reduced to HT20 due to nearby access point on HT40 secondary channel
522 IEEE 802.11 TKIP countermeasures initiated
53 Taking over as APT master
531 High cost APT link
541 Soware error
56 APT peer bridge settings do not match
57 logwatcher start timeout
Code Battery Gas Gauge Codes (6*)
61 Battery gas gauge i2c device could not be found.
62 Incorrect gas gauge revision 1 EEPROM settings.
63 Incorrect gas gauge revision 2 EEPROM settings.
64 Incorrect gas gauge revision 3 EEPROM settings.
65 Unknown gas gauge revision.
66 Incorrect ME3 gas gauge revision 0 EEPROM settings.
67 Internal battery charger disabled.
Code Other Codes (7, 8, 9*)
71 Host flapping detected.
73 Invalid channel configured.
741 Signing key installation failure.
55

Rajant BreadCrumb ES1 Specifications

General

Brand	Rajant
Model	BreadCrumb ES1
Category	Network Hardware
Language	English