1 Overview
1.1 Introduction
The Enterprise Grade DIY outdoor Gateway is an ideal product for IoT commercial
deployment. It contains the Main Board, Operator-grade waterproof enclosure, backup
battery and mounting accessories. The hardware main board completely integrates the
WIFI, 4G, GPS and PoE main supply with an integrated back-up battery. The firmware
implements a fully featured LoRaWAN™ complinant network base station. The
Gateway has a range of over 15Km line-of-sight and over 2Km in dense urban
environments.
The DIY Gateway brings more flexiblity for the developer to create an enterprise grade
solution: our most important difference is our flexible development support structure,
allowing for faster development and time to market. We offer both a ready to go
firmware image for openWRT based platforms and an open SDK for integration into
hardware to support the needs of each customer.
1.2 Main Features
Enterprise grade network gateway with your own configuration.
LoRaWAN™ Stack Inside and integrate the Web UI for management.
Complete Hardware specification including LoRa concentrator, Cellular, GPS and
WIFI.
Supports Power of Ethernet (PoE) IEEE 802.3af/at-Compliant Class 4, 48V.
Battery Backup sustains operation for 5 hours under typical conditions.
IP67 waterproof enclosure with cable gland.
To Next Page
Loading...
Need help?
General
