3
IMPORTANT SAFETY INSTRUCTIONS! PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Install in accordance with the Bob Carver Company instructions.
8. Do not install in close proximity to heat sources such as radiators, heat registers, stoves, fire-
places, or other apparatus (including other amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obso-
lete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the power amplifier.
11. Only use attachments/accessories specified by Bob Carver Company.
12. Use only with the cart, stand, tripod, bracket, or table recommended by Bob Carver Compa-
ny. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Do not expose this equipment to dripping or splashing liquids, and ensure that no objects
filled with liquids, such as vases, are placed on the equipment.
16. To completely disconnect this equipment from the AC mains, disconnect the power supply
cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall remain readily operable.
18. Connect mains power supply cord only to a mains socket outlet with a protective grounding
connection.
19. If possible, save the shipping carton that contained your RAM 285, as well as the individual
tube boxes
To Next Page
Loading...
