APPENDIX C – TOOLS AND EQUIPMENT
APPENDIX C-2
Rev 1C – July 2008
LIST OF STANDARD TOOLS THAT SHOULD BE INCLUDED
IN THE INSTALLERS TOOL BOX
• 3/8" Drive Electric Drill • 3/8" Drive Ratchet w/6" Extension
• 4-1/2" Electric Grinder • 3/8" Drive. Bit Driver
• 10-12" Hacksaw • Combination Screwdriver
• Torpedo Magnetic Level • #2 Stubby Robertson Screwdriver
• Utility Knife • #2 Stubby Phillips Screwdriver
• 25'x1" Measuring Tape • Terminal Block Screw Driver (1/8"
Tipped Flathead)
• 12" Combination Square • Combination Wire Stripper/Crimper
• Drywall Saw • 7" Wire Cutters
• Multi-meter • 8" Linesman Pliers
• Pop Rivet Gun • Needle Nose Pliers
• 16 oz. Ball Peen Hammer • 10" Channel Lock Pliers
• Tapered Hole Punch • 7/8", 1 1/8", 1 1/16", 1 1/4" Hole Saws
w/arbor
• Center Punch • Drill Bits (1/8,5/32,13/64,1/4) X2 & 1/2"
w/3/8 shaft
• Cold Chisel • Taps (10-24 & 1/4-20 NC.) X2
• 1/2" Wood Chisel • Large Flat Head Screw Driver
• 10" Vise Grip (x2) • Needle Nose Vise Grips
• 7" Quick Clamp
• Round & Flat File
• 1/16"-3/8" Allen Wrenches
• 3/8,7/16,1/2,9/16,5/8,11/16,3/4
Combination Wrenches
• 5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4&5/8
Deep 3/8" Dr. Sockets
To Previous Page
Loading...
General