R&S RTO - Page 581

Remote Control
R&S
®
RTO
565User Manual 1316.0827.02 ─ 06
MEASurement<m>:DISPlay:STYLe <DisplayStyle>
Selects the style in which the measurement waveform is displayed.
Suffix:
<m>
.
1..9
See "Measurement selection: MEASurement<m>" on page 522.
Parameters:
<DisplayStyle> LINE | MARKer
LINE
The individual data points are connected by a line.
MARKer
Only the individual data points are displayed as markers.
*RST: LINE
MEASurement<m>:
DISPlay:HISTogram <DispHistg>
Displays a histogram for the source of the selected measurement.
Suffix:
<m>
.
1..9
See "Measurement selection: MEASurement<m>" on page 522.
Parameters:
<DispHistg> ON | OFF
*RST: OFF
16.2.9.8 Limit check
MEASurement<m>:LCHeck............................................................................................565
MEASurement<m>:LCHeck <LimitCheckState>
Defines the type of the limit check that can run together with the measurement.
Suffix:
<m>
.
1..9
See "Measurement selection: MEASurement<m>" on page 522.
Parameters:
<LimitCheckState> OFF | LIMit | LMARgin
OFF
No limit check.
LIMit
Only limits are checked.
LMARgin
Limits and margins are checked.
*RST: OFF
Command Reference