R&S RTO - Page 649

Remote Control
R&S
®
RTO
633User Manual 1316.0827.02 ─ 06
Usage: SCPI confirmed
SEARch:GATE:MODE <SearchName>,<Mode>
SEARch:GATE:MODE? <SearchName>
Defines whether the gate settings are configured using absolute or relative values.
Parameters:
<Mode> ABS | REL
*RST: ABS
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
SEARch:GATE:SHOW <SearchName>,<DisplayState>
SEARch:GATE:SHOW? <SearchName>
If enabled, the gate area is indicated in the source diagram.
Parameters:
<DisplayState> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
SEARch:GATE:ABSolute:STARt <SearchName>,<Start>
SEARch:GATE:ABSolute:STARt? <SearchName>
Defines the starting value for the gate.
Parameters:
<Start> Range: -100E+24 to 100E+24
Increment: 0.01
*RST: 0.01
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
SEARch:GATE:ABSolute:STOP <SearchName>,<Stop>
SEARch:GATE:ABSolute:STOP? <SearchName>
Defines the end value for the gate.
Command Reference