Command reference
R&S
®
ZNA
1345User Manual 1178.6462.02 ─ 20
Parameters:
<Address> Use SENSe:GDEVice:ADDRess? to get the address strings of
the configured generic devices.
If omitted as a parameter, the query returns all generic device
command configurations of channel <Ch>.
As a return value, <Adress> takes the long form described in
Table 5-11, with an additional prefix GenericDevice:: (see
example).
<CommandFilepath> Path to the command file, either absolute or relative to the cur-
rent directory (see MMEMory:CDIRectory).
<CommandId> A unique "Command Name" (see Chapter 5.19.8, "Generic
Device tab", on page 836) within command file <CommandFile-
path>.
Example:
:SYSTem:COMMunicate:RDEVice:GDEVice1:DEFine
'VXI-11','192.168.0.1'
:SYSTem:COMMunicate:RDEVice:GDEVice2:DEFine
'VXI-11','192.168.0.2'
Configure two generic external devices.
SENSe:GDEVice:ADDRess?
Query the configured generic device addresses. The result is
'192.168.0.1','192.168.0.2'.
:SENSe1:GDEVice:SELect '192.168.0.1',
'test.json','MySetting1'
:SENSe1:GDEVice:SELect '192.168.0.2',
'test.json','MySetting2'
Configure the commands to be sent to the devices before chan-
nel 1 is measured. The commands 'MySetting1' and 'MySetting2'
are defined in a command file test.json that is located in the
current directory.
:SENSe1:GDEVice:DELete '192.168.0.1'
For channel 1, no command is sent to generic device 1.
:SENSe1:GDEVice:DELete
For channel 1, no commands are sent to any generic devices.
Manual operation:
See "Config. File/Command" on page 840
7.3.14.14 [SENSe:]HARMonic...
Implements functions related to harmonic grids for time domain transformation.
[SENSe<Ch>:]HARMonic?............................................................................................1346
[SENSe<Ch>:]HARMonic:AUTO....................................................................................1346
[SENSe<Ch>:]HARMonic:DLENgth:DATA...................................................................... 1346
[SENSe<Ch>:]HARMonic:ELENgth:DATA.......................................................................1346
[SENSe<Ch>:]HARMonic:MLENgth:DATA...................................................................... 1347
[SENSe<Ch>:]HARMonic:PERMittivity:DATA.................................................................. 1347
[SENSe<Ch>:]HARMonic:RTIMe:DATA..........................................................................1347
[SENSe<Ch>:]HARMonic:RTIMe:THReshold..................................................................1348
[SENSe<Ch>:]HARMonic:VELocity:DATA.......................................................................1348
SCPI command reference
To Next Page
Loading...
