R&S ZNA26 - Page 1344

Command reference
R&S
®
ZNA
1344User Manual 1178.6462.02 ─ 20
[SENSe<Ch>:]GDEVice:DELete [<Address>]
Deletes generic device command configurations for channel <Ch>.
Suffix:
<Ch>
.
Channel number
Setting parameters:
<Address> Address string
If present, only the command configuration of the related device
is deleted. Otherwise, the command configurations of all generic
external devices are deleted.
Use SENSe:GDEVice:ADDRess? to get the address strings of
the configured generic devices.
Example: See [SENSe<Ch>:]GDEVice:SELect on page 1344.
Usage: Setting only
Manual operation: See "Reset" on page 841
[SENSe<Ch>:]GDEVice:MSELect <Address>, <CommandFilepath>,
<MixerCommandId>
Defines or queries the generic device calibration mixer command configuration of
channel <Ch>.
Suffix:
<Ch>
.
Channel number
Parameters:
<Address> Use SENSe:GDEVice:ADDRess? to get the address strings of
the configured generic devices.
If omitted as a parameter, the query returns all generic device
calibration mixer command configurations of channel <Ch>.
As a return value, <Adress> takes the long form described in
Table 5-11, with an additional prefix GenericDevice:: (see
example).
<CommandFilepath> Path to the command file, either absolute or relative to the cur-
rent directory (see MMEMory:CDIRectory).
<MixerCommandId> A unique "Command Name" (see Chapter 5.19.8, "Generic
Device tab", on page 836) within command file <CommandFile-
path>.
Manual operation: See "Generic Device Setting for Calibration Mixer" on page 537
[SENSe<Ch>:]GDEVice:SELect <Address>, <CommandFilepath>, <CommandId>
Defines or queries the generic device command configuration of channel <Ch>.
Suffix:
<Ch>
.
Channel number
SCPI command reference