R&S ZNA26 - Page 1479

Command reference
R&S
®
ZNA
1479User Manual 1178.6462.02 ─ 20
Suffix:
<Ch>
.
Channel number
Parameters:
<Boolean> ON | OFF | 0 | 1
Options: R&S ZNA-K9
Manual operation: See "Track LO" on page 635
SOURce<Ch>:LOTRack:DFRequency?
If LO tracking is active in channel <Ch> (SOURce<Ch>:LOTRack[:STATe] ON), this
query gets the frequency difference between expected and measured LO frequency
Suffix:
<Ch>
.
Channel number
Return values:
<freq_diff> Frequency difference
Usage: Query only
Options: R&S ZNA-K9
Manual operation: See "Track LO" on page 635
SOURce<Ch>:NFIGure:CALibration:TPOWer <SourcePowNfigCalExtAtt>
Suffix:
<Ch>
.
Parameters:
<SourcePowNfigCalExtAtt>Default unit: dBm
Options: R&S ZNA-K30
Manual operation: See "Src Power Thru Meas" on page 541
SOURce<Ch>:NFIGure:CALibration:TPOWer:STATe <Boolean>
Suffix:
<Ch>
.
Parameters:
<Boolean>
Options: R&S ZNA-K30
Manual operation: See "Src Power Thru Meas" on page 541
SOURce<Ch>:PATH<Pt>:DIRectaccess <Path>
Same functionality as [SENSe<Ch>:]PATH<Pt>:DIRectaccess.
SCPI command reference