R&S ZNA26 - Page 946

Command reference
R&S
®
ZNA
946User Manual 1178.6462.02 ─ 20
Manual operation: See "Measure / Measure Open / Measure Short" on page 676
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:FILename <String>
For a fixture modeling with the ISD tool and coupon types SYMMetric2x | OPEN1x |
SHORt1x (see CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command
loads the coupon properties from a Touchstone file.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Parameters:
<String> Path to the Touchstone file, either absolute or relative to the
selected working directory (CALCulate:FMODel:DIRectory).
Manual operation: See "Load File / 1x Open Preset / 1x Short Preset" on page 677
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:FILename:CLEar
Invalidates the file path previously set using CALCulate:FMODel:ISD<Ph_pt>:
DUT:MEASure:FILename, CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:
OPEN:FILename, or CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:
SHORt:FILename.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Usage: Event
Manual operation: See "Load File / 1x Open Preset / 1x Short Preset" on page 677
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:OPEN
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command starts the mea-
surement of the Open coupon at the active ports (see CALCulate:FMODel:
ISD<Ph_pt>:COUPon[:STATe]).
Suffix:
<Ph_pt>
.
This suffix is ignored.
Usage: Event
Manual operation: See "Measure / Measure Open / Measure Short" on page 676
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:OPEN:FILename <String>
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command loads the proper-
ties of the Open coupon from a Touchstone file.
SCPI command reference