R&S ZNLE Series - Page 19

Preparing for Use
R&S
®
ZNLE
19Getting Started 1323.2873.02 ─ 07
●
"Administrator": an administrator account with unrestricted access to the
computer/domain
Some administrative tasks require administrator rights (e.g. the configuration of a
LAN network). Refer to the description of the basic instrument setup ([SETUP]
menu) to find out which functions are affected.
Automatic login
For the standard instrument account, an automatic login function is active by
default. If activated, login is carried out automatically in the background when the
R&S ZNLE is started, without having to enter a password. This function is active
until an administrator explicitly deactivates it or changes the password.
For information on how to deactivate or reactivate the automatic login, refer to
Chapter 4.2.3.1, "Automatic Login Function", on page 19.
Passwords
For all default user accounts, the initial password is 894129. Note that this pass-
word is very weak, and it is recommended that you change the password for both
users after initial login. An administrator can change the password in Windows for
any user at any time via "Start > Settings > Account > SignIn Options > Password
> Change".
Changing the password and use of auto-login function
Note that when you change the default passwords, the default auto-login
function no longer works! Reactivate it manually as described in "Reactivat-
ing the automatic login function" on page 21.
4.2.3.1 Automatic Login Function
When shipped, the instrument automatically logs on the default "Instrument" user
to Windows using the default password.
Windows Operating System