Rane SL3 - Page 31

This section of the control vinyl has
been worn. Swap sides or use the track start offset.
Your record is very badly worn
and Scratch Live is unable to track correctly. Swap
sides or get new vinyl ASAP.
Susceptible to
dust and vibration. Adjust the tonearm.
The signal from the needle
is not reaching the SL 3. Check the cable and cartridge
connections.
Left signal has been lost
with a noisy loose connection.
      The left and
right signals have been combined into one somewhere
in your signal chain.
    The signal from the
needle is not reaching the SL 3. Check the cable and
cartridge connections.
     Right signal has been
lost with a noisy loose connection.
     Right signal
has been lost with a noisy loose connection and left
channel crosstalk.
RANE SL 3 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 1.8.4
31