3 pan supports Wok cradle
ArtNo.000-0009 Wok ring, cast
Grill pan and trivet 2 at shelves
ArtNo.330-0001 - Grill pan
Handyrack
Tall oven shelves and shelf
supports (example shown)
ArtNo.324-0003 Handyrack
ArtNo.000-0010 Tall oven shelves
Checking the parts: You will need the following equipment to complete the
cooker installation satisfactorily:
• Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted. These are not supplied with the
cooker but are available at most builders’ merchants.
• Gas pressure tester/manometer.
• Flexible gas hose: Must be in accordance with the
relevant standards.
• Multimeter: For electrical checks.
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if tting the cooker on a
stone or concrete oor)
3. Wall plugs (only required if tting the cooker on a stone
or concrete oor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. Spirit level
8. Pencil
9. Adjustable spanner
10. Screws for tting stability bracket
11. 13 mm spanner or socket wrench
To Next Page
Loading...
