ratiotec rapidcount T 575 - Settings and Configuration; Operation and Error Avoidance; System Settings

13
[EN]
Operation
Settings
Place the device on a stable, level surface away from strong electromagnetic elds and direct sunlight.
For safety reasons, only use earthed sockets. After switching on the rapidcount T , the machine carries out a
self-test. After a successful test, the device is ready for use.
How to avoid mistakes when counting banknotes:
. Avoid counting wet, excessively dirty, or damaged banknotes.
. Make sure that there are no foreign objects such as paper clips, rubber bands, staples, dust, etc. between
the banknotes.
. Remove any creases or folds in the banknotes before placing them in the feeder.
To set up the banknote counter, press the MENU button on the main screen to access the user menu. Use the
navigation buttons to select the desired menu item and conrm it with the START button. Use the MENU button
to exit the user menu.
Setting the beep function
. Select the option “Beep Setup”.
. Press the START button to conrm.
. Select the desired element.
. Press the CUR or PRINT button to toggle between switching on and o.
. Press the MENU button to exit the menu.
Setting the date format
. Select the option “Date Format”.
. Press the CUR or PRINT button to change the date format.
. Press the MENU button to exit the menu.
Setting the date and time
. Select the option “Time & Date”.
. Press the START button to conrm.
. Use the MODE or REPORT button to select the desired entry.
. Change the value with the CUR or PRINT key.
. Press the START button to conrm.
. Press the MENU button to exit the menu.