Commissioning
65
7
Example for full border spreading during late fertilising:
Figure 7.19: Full border spreading during late fertilising
Full border spreading during late fertilising mode refers to a spreading process in
which a bit more fertiliser lands beyond the border of the field. Therefore, there is
just a slight underfertilisation at the field boundary.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters:
Type of fertiliser: KAS BASF
Application rate: 150 kg/ha
Working width: 24 m
Forward speed: 12 km/h
Mounting height: 0/6 (A = 0 cm, B = 6 cm)
Drop point: 6.5
Metering slide adjustment: 90
Spreading disc type: S4
Spreading disc speed 900 rpm
Limited border spreading disc speed: 600 rpm
To Next Page
Loading...
