To Next PageTo Next Page
Need help?Do you have a question about the Rauch AXIS H EMC Series and is the answer not in the manual?
Specifies the correct and approved applications for the mineral fertiliser spreader.
Provides essential safety notes and prerequisites for safe machine operation.
Explains the structure and meaning of warning signs and symbols.
Covers general safety principles and conditions for operating the machine.
Defines operator responsibilities and the importance of proper instruction.
Lists critical instructions to prevent accidents during operation.
Guidelines for ensuring safe machine operation and avoiding hazards.
Mandatory checks to ensure operating safety before commissioning.
Identifies hazard zones around the machine and safety measures.
Safety precautions and rules to follow during machine operation.
Identifies the location of safety equipment, warning and instruction stickers.
Guidance on calculating total weight, axle loads, and tyre load capacity.
Checks to perform when receiving the machine to ensure completeness and condition.
Mechanical, hydraulic, and electrical requirements for the tractor.
Step-by-step instructions and safety checks for attaching the machine.
Guidelines for setting the correct mounting height for optimal spreading.
Procedures and safety warnings for filling the machine's hopper.
How to determine settings for mounting height, drop point, and discs.
Reference to the fertiliser chart for proper setting of the machine.
How to adjust the application rate using the electronic control unit.
Guidance on selecting the appropriate spreading disc for the working width.
Table showing spreading disc compatibility with working widths.
How to adjust the drop point for optimal working width and fertiliser distribution.
Essential checks and conditions to fulfill before starting fertiliser spreading.
Using VariSpread for precise spreading width and application rate control.
Troubleshooting guide for common faults and their potential causes.
General safety precautions and warnings for maintenance tasks.
Instructions for adjusting the metering slide for smooth operation.
Procedure for checking and adjusting the fertiliser drop point.
General
