Safety 3
18
3.10.2 Function of safety devices
The safety devices are designed to protect your health and life.
Before working with the machine, ensure that the protective devices are func-
tioning.
Only operate the machine when the safety devices are functional.
Do not use the deflector bracket to climb up on the machine. It is not designed
for this. There is a risk of falling.
3.11 Warning and instruction stickers
Various warning and instruction notes are attached to the machine (for the posi-
tion at the machine, please refer to 3.10.2: Function of safety devices, page 18
).
The warning and instruction stickers are components of the machine. They must
not be removed or modified. Missing or illegible warning and instruction stickers
must be replaced immediately.
If new components are installed during repairs, the same warning and instruction
stickers that were on the original parts must be placed on the new parts.
Designation Function
Protective grid in hop-
per
Prevents body parts from being caught by the rotating
agitator.
Prevents body parts from being cut off by the metering
slider.
Prevents faults during spreading caused by lumps in
the spreading material, large stones or other large ob-
jects (screening effect).
Protective grid lock Prevents the inadvertent opening of the protective grid
in the hopper. Engages mechanically if protective grid
is closed properly. Can only be opened by using a tool.
Deflector bracket Protection against getting caught by the rotating
spreading discs from behind and from the side.
Spreading disc cover Protection against getting caught by the rotating discs
from the front.
Prevents the fertiliser from being ejected towards the
front (in the direction of the tractor/workstation).
NOTICE
The correct warning and instruction notices can be obtained from the spare parts
service.
To Next Page
Loading...
