Maintenance and repair 9
102
9.6 Opening the protective grid in the hopper
The protective grids in the hopper lock automatically by means of a protective grid
lock.
Figure 9.4: Protective grid lock open/closed
In order to avoid an inadvertent opening of the protective grid, the protective grid
lock can only be released by using a tool (e.g. by means of the adjustment lever).
n WARNING
Risk of injury due to moving parts in the hopper
There are moving parts in the hopper.
There is a risk of injury to hands and feet during commissioning
and operation of the machine.
It is important that the protective grid is installed and locked
before commissioning and operating the machine.
The protective grid may only be opened for maintenance
purposes or in the event of a fault.
To Next Page
Loading...
