Rauch AXIS H EMC Series - Page 109

Maintenance and repair
103
9
Before opening the protective grid:
 Disengage the PTO shaft.
 Lower the machine.
 Turn the tractor motor off. Remove the ignition key.
Figure 9.5: Open the protective grid lock
 Execute a regular function check of the protective grid lock. See figure below.
 Immediately replace defective protective grid locks.
 If required, correct the setting by moving the protective grid lock [1] up/down
(see figure below).
Figure 9.6: Test dimension for functional check of the protective grid lock
1...2 mm
1