Rauch AXIS H EMC Series - Settings for Unlisted Fertiliser Types; Requirements and Conditions

Commissioning 7
68
7.9 Settings for unlisted fertiliser types
The settings for fertiliser types not listed in the fertiliser chart can be calculated
using the practice test kit (optional equipment).
To check the spreader settings quickly, we recommend the layout for one pass.
To determine the spreader settings accurately, we recommend the layout for
three passes.
7.9.1 Requirements and conditions
 Conduct the test on a dry day, with no wind, so the weather will not influence
the result.
 We recommend a testing area that is horizontal in both directions. The tracks
must not have any significant cavities or heights since this may distort the
spreading pattern.
 Carry out the test either on freshly mown grass or on a field with low vegeta-
tion (max. 10 cm).
NOTICE
For calculating the settings for unlisted fertiliser types, please also see the sup-
plementary manual for the practice test kit.
NOTICE
The requirements and conditions apply to both one pass and three passes.
Observe these conditions to ensure that the results are as accurate as possible.