EasyManua.ls Logo

Rauch AXIS H EMC Series - Technical Data of Basic Equipment

Rauch AXIS H EMC Series
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data
31
4
4.3.2 Technical data of basic equipment
Dimensions:
Weights and loads:
Data AXIS H
30.2 EMC
AXIS H
30.2 EMC + W
AXIS H
50.2 EMC + W
Overall width 240 cm 240 cm 290 cm
Overall length 141.5 cm 145.0 cm 161.0 cm
Filling height
(basic machine)
107 cm 107 cm 131 cm
Distance between cen-
tre of gravity and lower
link point
65.5 cm 72.5 cm 74.5 cm
Filling width 230 cm 230 cm 270 cm
Working width
1
1. Working width depending on fertiliser and disc type
12 - 42 m 12 - 42 m 18 - 50 m
Hopper capacity 1,400 l 1,400 l 2,200 l
Mass flow
2
2. Max. mass flow depending on fertiliser type
max. 500 kg/min 500 kg/min 500 kg/min
Hydraulic pres-
sure
max. 210 bar 210 bar 210 bar
Hydraulic performance 50 l/min 50 l/min 65 l/min
Sound pressure level
3
(measured in the
closed driver's cabin of
the tractor)
3. Since the sound pressure level of the mineral fertiliser spreader can only be determined when
the tractor is running, the actual measured value is greatly dependent on the tractor type being
used.
75 dB(A) 75 dB(A) 75 dB(A)
NOTICE
The empty weight (mass) of the mineral fertiliser spreader varies depending on
the feature package and attachment combination. The empty weight (mass)
shown on the nameplate refers to the standard version.
Data AXIS H
30.2 EMC
AXIS H
30.2 EMC + W
AXIS H
50.2 EMC + W
Empty weight 355 kg 415 kg 710 kg
Payload max. 3200 kg 4200 kg

Table of Contents

Other manuals for Rauch AXIS H EMC Series

Related product manuals