Rauch AXIS H EMC Series - Maximum Admissible Mounting Height at Front (V) and Rear (H)

Commissioning 7
50
7.4.2 Maximum admissible mounting height at front (V) and rear (H)
The maximum admissible mounting height (V + H) is measured from the
ground to the lower edge of the frame.
Figure 7.6: Maximum admissible mounting height V and H during normal and
late fertilising
The maximum admissible mounting height depends on the following factors:
 Normal fertilisation or late fertilising
Machine type Maximum admissible mounting height
during normal fertilising during late fertilising
V [mm] H [mm] V [mm] H [mm]
AXIS H 30.2 EMC
AXIS H 30.2 EMC + W
1040 1040 950 1010
AXIS H 50.2 EMC + W 990 990 900 960
V
H