Rauch AXIS H EMC Series - Transportation Drive with the Machine

Safety
13
3
3.9.2 Transportation drive with the machine
Handling, steering, and braking performance of the tractor are affected by the at-
tached machine. For example, an excessive weight of the machine will reduce the
weight on the tractor's front axle and affect its steering.
 Be aware of the changed driving behaviour.
 When driving, always ensure that there is sufficient visibility. If vision is re-
stricted (e.g. when reversing), another person is required to direct the driver.
 Observe the permissible maximum speed.
 Avoid sudden turns when driving uphill or downhill or across a slope. Due to
the changed centre of gravity, there is a danger of overturning. Special care
is to be particularly applied when driving on uneven, soft ground (e.g. when
entering fields, kerbs).
 Arrest sideways movement of the lower link of the three-point linkage to pre-
vent the machine from swinging.
 Passengers are prohibited on the machine during the drive and operation.