Rauch AXIS H EMC Series - Using the Steps Securely

Commissioning
57
7
7.5.4 Using the steps securely
Use hand grips when climbing onto the machine.
 Only use latched and folded-out steps.
 Without hopper cover on machine, use the side wall of the hopper as hand
grip in order to securely climb onto the machine.
 If the machine is equipped with a hopper cover, use the hand grip on the hop-
per cover in order to securely climb onto the machine.
Figure 7.12: Climbing onto the machine without hopper cover
Figure 7.13: Climbing onto the machine with hopper cover