EasyManua.ls Logo

Ravaglioli RAV540U User Manual

Ravaglioli RAV540U
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
0579-M090-0 Rev. n. 4 (07/18)
SOLLEVATORE ELETTROIDRAULICO
ELECTRO-HYDRAULIC LIFT
RAV540U - RAV540IU
Redatto da S.D.T. S.r.l.
0579-M090-0
Per eventuali chiarimenti interpellare il più vicino rivenditore oppure rivolgersi direttamente a:
Servizio assistenza tecnica: RAVAGLIOLI S.p.A - Via 1° Maggio, 3 - 40037 Pontecchio Marconi - Bologna Italia
Tel. (+39) 051 6781511 - Fax (+39) 051 846349 - e-mail: aftersales@ravaglioli.com
For any further information please contact your nearest dealer or speak directly to:
Technical services: RAVAGLIOLI S.p.A. - Via 1° Maggio, 3 - 40037 Pontecchio Marconi - Bologna Italy
Phone (+39) 051 6781511 - Fax (+39) 051 846349 - e-mail: aftersales@ravaglioli.com
ITALIANO: ISTRUZIONI ORIGINALI
ENGLISH: TRANSLATION OF THE ORIGINAL INSTRUCTIONS
READ ALL INSTRUCTIONS.
INSTRUCTIONS MUST BE READ THOROUGHLY BEFORE INSTALLING, OPERATING OR MAINTAINING THE LIFT.
SAVE THIS INSTRUCTIONS
DELIVER THE LIFT-SPECIFIC, OPERATION, INSPECTION, AND MAINTENANCE INSTRUCTIONS
TO LIFT OWNER/USER/EMPLOYER ALONG WITH THE OTHER INSTRUCTIONAL MATERIALS FURNISHED WITH THE LIFT.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Ravaglioli RAV540U and is the answer not in the manual?

Ravaglioli RAV540U Specifications

General IconGeneral
BrandRavaglioli
ModelRAV540U
CategoryScissor Lifts
LanguageEnglish

Summary

0. General Safety Precautions

0.1 Important Safety Instructions

Detailed safety rules to follow before operating the lift.

0.2 Safety Devices

Description of the lift's built-in safety features and their functions.

Safety Warning Labels

Displays and explains various safety warning labels for lift operation and user responsibilities.

1. Purpose of the Machine

1.1 Accessories

Lists and illustrates accessories supplied with or available for the lift.

2. Pre-Installation and Movement

3. Description of the Lift

3.1 Preparation for Use

Specifies that the product is manufactured according to ANSI/ALI ALCTV:2011 standard.

3.2 Main Technical Characteristics

Lists key technical features such as hydraulic synchronization and safety valves.

3.3 Controls

Description of the control unit, main switch, and rise/descent buttons.

3.4/3.5 Accessories

Details on requested and supplied accessories, including rubber pads.

4. Installation

4.1 Site Requirements

Checks for installation site suitability, lighting, ventilation, and space.

4.2 Installation Area Preparation

Procedures for preparing ground areas for RAV540U, including flooring resistance.

4.3 Installation Area Preparation (RAV540IU)

Procedures for preparing recessed installation areas for RAV540IU.

4.4 Positioning and Connections (RAV540U)

Steps for positioning footboards and connecting systems for RAV540U.

Wiring Diagram

Installation Connections

4.6 Connecting to Mains

Requirements for connecting the lift to the electrical mains supply.

4.8 Compressed Air Connection

Instructions for connecting the pneumatic system with filtered and lubricated air.

4.9 Bleeding the Air

Procedure for removing air from the hydraulic system after pipe connections.

Assembly and Testing

4.10 Fastening and Safety Checks

Steps for securing the lift and verifying safety switch operation.

4.12 Ramp Assembly and Levelling

Instructions for assembling and adjusting the levelling of the ramps.

4.14-4.17 Installation Steps and Testing

Procedures for fitting ramp supports, securing covers, operation, and functional tests.

5. Operation Instructions

5.1 Improper Use Warnings

Strictly forbidden uses of the lift and potential hazards.

5.3 Operator Training

Requirements for operator qualifications and training for safe operation.

5.5 Commands and Functions

Identifies and explains the function of the lift's control buttons and switches.

6. Safety and Emergency Procedures

6.1 Emergency Procedures

Step-by-step guide for emergency descent without power.

7. Maintenance Procedures

7.1 Lockout/Tagout Procedure

Mandatory safety procedure for isolating energy sources before maintenance.

7.2-7.5 Scheduled Maintenance Tasks

Details on oil changes, valve cleaning, lubrication, and platform realignment.

8. Troubleshooting Common Problems

9. Storage Instructions

10. Scrapping Procedures

Hydraulic and Pneumatic Diagrams

11. Installation and Periodic Inspections

Periodic Inspections Checklist

A checklist for performing routine periodic inspections on the lift.

Owner/Employer Responsibilities

Initial Installation Checklist

Random Inspections

12. Identification Plate Information