Raven RCM User Manual

CHAPTER 4
34 RCM Dry Manure/Litter Setup Guide
TOOLS
FIGURE 16. Setup Tabs
APPLICATOR SETUP TAB
The Applicator Setup Tab provides options to create a new, edit, or remove an applicator. This tab also provides a
summary to the section configuration. For more information on the Precision Farming Setup button, refer to the
Raven Rate Control Module Operation Manual (P/N 016-0171-637).
SYSTEM SETTINGS
The system settings provides access to settings and options which allow the operator to adjust the system
configuration values as needed, to maintain proper control of the system. The table below describes each button
in detail.
Applicator
Setup
System
Setting
Alarms Rates Feature
Unlocks

Raven RCM Specifications

General

Brand	Raven
Model	RCM
Category	Control Unit
Language	English