Manual # 016-0130-030 Rev B
11
Changing Boom
Mode
(PowerGlide
Plus or
UltraGlide)
1. Press Function Key 2 (Menu) from the main screen to return to the
configuration menu.
2. Press Function Key 1 (SET BOOM MODE).
3. Press Function Key 1 (PowerGlide Plus). This will place the controller
in the pressure mode and the ultrasonic sensors will no longer be used
to control boom height.
4. A warning screen is displayed regarding the need to have gauge wheels
installed and adjusted to prevent boom damage when entering
PowerGlide Plus mode.
5. Press Function Key 1 (OK) to enable PowerGlide Plus mode.
To Next Page
Loading...
