.
User’s guide Ytterbium Pulsed Fiber Laser RFL-P20QB～P30QB Ver.: 2.0
Safety Information
Please read this instruction carefully and familiarize yourself with the information we have
provided before you use the product. In this brochure, important operation procedures, safety and
other information are provided for you and all future users. In order to ensure operatingsafely
and optimal performance of the product, please do according to following warnings, cautions and
other information.
Raycus pulsed fiber laser is classified as a high power Class IV laser device. Before supplying
the power to the device, please make sure that the correct voltage of 24VDC power source is
connected and the anode and cathode are right. Failure to connect power source correctly will
cause damage to the device.
The device emits invisible 1060~1085nm wavelength light with average power 20W/30W. Do
not expose your eyes or skin to the radiation of the laser.
Do not take apart the device, because there are no replaceable accessories available for users
to use. Any maintenance can only be proceeded in Raycus.
Do not look into the light output end directly. Use appropriate laser safety eyewear when
operating the device.
Safety labels and locations
The two labels above are located on the top of the cover of the device, representing laser
radicalization.
To Next Page
Loading...
Need help?
General
