Raymarine a67 Wi-Fi - Page 130

Navigatingtoawaypointonthescreen
D
117 53-2
Fromthechartorradarapplication:
1.Selectthewaypoint.
Thewaypointcontextmenuisdisplayed.
2.SelecttheGotoWaypoint.
Note:WithanactivewaypointselectedyoucanselectStop
Gotooptionfromthewaypointcontextmenuatanytimeto
canceltheaction.
Navigatingtoawaypointinthewaypointslist
Fromanyapplication:
1.SelectWPT.
Thewaypointmenuisdisplayed.
2.SelectViewWaypointList.
Thewaypointslistisdisplayed.
3.Selecttherequiredwaypoint.
Thewaypointoptionsdialogisdisplayed.
4.SelectGotoWaypoint.
Note:SelectingWPTfromthehomescreenwilltakeyouto
thewaypointslist.
Cancellingnavigationtoawaypoint
Fromthechartorradarapplication:
1.Selecttheactivewaypoint.
Thewaypointcontextmenuisdisplayed.
2.SelectStopGoto.
3.Alternatively,inthechartapplication,goto:Menu>Navigate
>StopGoto.
Note:Oncenavigationisnolongeractive,thewaypoint
symbolreturnstoitsnormalstate,andthedashedline
betweenyourvesselandthewaypointisremoved.
Arrivingatawaypoint
Asyourvesselapproachesawaypoint,thewaypointarrival
alarmprovidesawarning.
1.SelectOkonthewaypointarrivalalarmpopupmessage.
Oncethealarmisacknowledged,thenextwaypointisselected,
andthedisplayupdatestoindicatethenextlegoftheroute.
Note:Youcansettheapproachdistance(radius)atwhichthe
waypointarrivalalarmwillsoundusingtheAlarmsmenufrom
thehomescreen:Set-up>Alarms>WaypointArrival.
CrossTrackError(XTE)
CrossTrackError(XTE)istheamountofdeviationfromyour
intendedrouteorwaypoint,expressedasadistance.
D117 65-2
XTE
Intheeventthatyousteeroff-track,youcangostraighttoyour
targetbyresettingXTE.
ResettingCrossTrackError(XTE)
Whilefollowingarouteinthechartapplication:
1.Selecttheroute.
Theroutecontextmenuisdisplayed.
2.SelectRestartXTE.
ResettingXTEresultsinanewcoursefromthecurrentvessel
positiontothecurrenttargetwaypoint.Thisdoesnotaffect
yoursavedroute.
D12 29 5-1
YoucanalsoresettheXTEfromtheNavigateMenu:Menu>
Navigate>RestartXTE.
Waypointinformation
Whenyoucreateawaypoint,thesystemassignsinformation
regardingthelocationmarked.Youcanviewandeditthedetails
ofanywaypointthathasbeencreatedandstored.
Thefollowinginformationisassignedorcapturedforeach
waypoint:
•Name
•Position(asLat/Lonandrange/bearingfromvessel.)
•T emperature(requiresappropriatesensor,onlyforwaypoints
capturedatthevesselposition.)
•Depth(requiresappropriatesensor,onlyforwaypoints
capturedatthevesselposition.)
•Dateandtime
•Comment(youcanaddyourowntextcommentstoa
waypoint.)
•Symbol(adefaultsymbolisassigned,oryoucanselectan
alternative.)
Thereare2featureswhichallowyoutovieworeditwaypoint
information:
•Placethecursoroverawaypointonthe2DchartorRadar
screentoviewselectedinformation.
•Usethewaypointlistforcomprehensiveinformationtoview
andeditasrequired.
•Y oucanallocatewaypointstoawaypointgrouptomake
waypointmanagementeasier.
Displayingthewaypointlist
1.SelectWPT.
2.SelectViewWaypointList.
Thewaypointlistisdisplayed.
Note:Youcanalsoaccessthewaypointlistfromthe
homescreenandchartapplicationbygoingtotheMyData
menuandselectingWaypointList.
Waypointediting
Editingwaypointdetails
WiththeWaypointListdisplayed:
1.Selectthewaypointyouwanttoedit.
Thewaypointoptionsdialogisdisplayed.
2.SelectEditWaypoint.
3.Selecttheeldyouwanttoedit.
130NewaSeries/NewcSeries/NeweSeries