What to do if external sensors are not being recognized by my Raymarine AIS4000?
If external sensors are not being recognized by your Raymarine Transceiver, check the Compatibility Mode option in the Interface Settings Menu. Then, check the Baud Rate setting. Finally, check that the wiring is correct.
General| AIS Class | Class B |
|---|---|
| GPS Receiver | Integrated |
| NMEA 0183 | Yes |
| NMEA 2000 | Yes |
| Waterproof Rating | IPX6 |
| Channels | 2 |
| DSC Capability | Yes |
| Power Supply | 10-32 V DC |
| Frequency | 161.975 MHz |
Essential safety instructions for installation, performance, and usage.
Information on position source accuracy, compass safe distance, and disposal.
Details on FCC, Industry Canada compliance, and CE marking.
Explains the Automatic Identification System (AIS) functionality and purpose.
Lists all items included in the AIS transceiver package.
Details necessary external items and considerations before installation.
Step-by-step guide for mounting and connecting the AIS transceiver.
Describes data connections, sensor configuration, and port details.
Instructions for connecting power supply and grounding the unit.
Guide for NMEA2000 network and PC/Mac USB connectivity.
Explains password entry, security settings, and default password.
Identifies front panel controls, display elements, and button functions.
Details how to navigate menus and understand displayed information and icons.
Explains alarm conditions, status indicators, and message handling.
Guides on entering vessel identification and voyage data.
How to display, filter AIS targets, and use CPA/TCPA settings.
Describes Micro SD card usage for charts, firmware, and data logging.
Explains setting up and using the WiFi network capabilities.
Covers switching modes, entering specific inland data, and alarm masking.
Details the connection and configuration of the Blue Sign switch.
Describes input/output circuits, port specifications, and dimensions.
Details transmission intervals, NMEA sentences, and unused fields.
Explains sensor priority, compatibility modes, and common issues.
Lists the contents of the junction box accessory kit.
Guides on mounting the junction box and connecting external equipment.
Provides physical, environmental, and connector specifications for the junction box.
Lists relevant IEC and ITU standards the product complies with.
Details product categorization and physical dimensions/weight.
Covers operating conditions, humidity, ingress rating, and electrical requirements.
Specs for display, keypad, GNSS, TDMA, DSC, and RF interfaces.
Technical details for WiFi and various data interface ports.
Information on power/data connectors and open source software licences.
Forms for recording vessel and installation specific information.
To Next Page
