Raymarine AXIOM PRO User Manual (English)

Other manuals for Raymarine AXIOM PRO

Advanced Operation Instructions194 pages

Questions and Answers:

K
Kenneth RiceAug 22, 2025
How to fix a Raymarine Marine Equipment that does not turn on?
- J
  Joshua HendersonAug 22, 2025
  If your Raymarine Marine Equipment product does not turn on or keeps turning off, start by checking the relevant fuses and breakers, replacing them if necessary. If the fuse continues to blow, inspect the cable for damage, broken connector pins, or incorrect wiring. Also, verify that the power cable connector is correctly oriented and fully inserted. Ensure the installation instructions have been followed for correct power connection.
K
ksnyderAug 23, 2025
What to do if the Raymarine Marine Equipment touchscreen is not working?
- M
  Michael SmithAug 23, 2025
  If your Raymarine Marine Equipment touchscreen isn't working as expected, first, ensure that TouchLock is deactivated by swiping your finger from left to right across the Power button swipe area. Also, bare fingers must make contact with the screen for correct operation, or you may use conductive gloves. Clean and dry the screen carefully.
C
charlesjenniferAug 25, 2025
Why is my Raymarine Marine Equipment display behaving erratically?
- R
  Robert LopezAug 26, 2025
  If your Raymarine Marine Equipment displays frequent unexpected resets, system crashes, or other erratic behavior, begin by checking the relevant fuses and breakers. Ensure the power supply cable is sound and all connections are tight and free from corrosion. Verify the power source provides the correct voltage and sufficient current.
J
Jessica SandersAug 26, 2025
What causes a Raymarine Marine Equipment to not start up (restart loop)?
- W
  William NguyenAug 27, 2025
  If your Raymarine Marine Equipment product will not start up and is stuck in a restart loop, the issue may be related to the power supply or connection. Refer to the troubleshooting steps for 'Product does not turn on or keeps turning off'. If the problem persists, the product's software may be corrupted. Try downloading and installing the latest software from the Raymarine website. As a last resort, attempt to perform a 'Power on Reset'. Be aware that this will delete all settings, presets, and user data, reverting the unit to factory defaults.
D
donaldelliottAug 27, 2025
Why is my Raymarine Marine Equipment showing no depth reading?
- L
  Larry CastroAug 28, 2025
  If you're not getting a depth reading or have lost bottom lock on your Raymarine Marine Equipment, verify that the transducer has been installed according to its instructions. If the transducer angle is too steep, it can miss the bottom; adjust the angle and recheck. Also, if the transducer has a kick-up mechanism, ensure it hasn't been triggered by an object. Check the condition of the transducer ensuring it is not damaged and is free from debris / fouling.
D
Darrell BarnesAug 29, 2025
How do I fix a Raymarine Marine Equipment when scrolling image is not being displayed?
- C
  Chelsea MorrisonAug 29, 2025
  If the scrolling image is not being displayed on your Raymarine Marine Equipment, make sure that Sonar is enabled by selecting Ping Enable from the Sonar app’s Sounder menu. Also, verify that the correct transducer is selected in the Sonar app’s Transducer menu. Check that the transducer cable connector is fully inserted and locked in position and check the transducer cable and connectors for signs of damage or corrosion.
A
Aaron TrujilloAug 30, 2025
Why does my Raymarine AXIOM PRO Car Navigation system not turn on?
- V
  virginiawilliamsAug 30, 2025
  If your Raymarine Car Navigation system isn't turning on or keeps turning off, there are several potential causes: * A blown fuse or tripped breaker: Check the condition of the relevant fuses and breakers and their connections, replacing them if necessary. * A poor, damaged, or insecure power supply cable or connections: Ensure the power cable connector is fully inserted into the unit and locked in position. * Incorrect power connection: Verify that the power supply is wired correctly, following the installation instructions. * Insufficient power source: Use a multi-meter to check the power supply voltage as close to the unit as possible while the product is under load to determine the actual voltage when current is flowing.
W
whitejeremiahSep 1, 2025
Why does my Raymarine AXIOM PRO show no fix?
- E
  Edward MorganSep 1, 2025
  If your Raymarine Car Navigation system displays no fix, it could be due to several reasons: * Your geographic location or prevailing conditions may be preventing a satellite fix. Try checking if a fix is obtained in better conditions or another geographic location. * There might be a GNSS connection fault. Ensure that external GNSS connections and cabling are correct and fault-free. * The external GNSS receiver might be in a poor location, such as below decks or in close proximity to transmitting equipment like a VHF radio. Make sure the GNSS receiver has a clear view of the sky.
M
Matthew SullivanSep 5, 2025
Why my Raymarine Car Navigation system cannot find network?
- J
  Jason BarnettSep 5, 2025
  If your Raymarine Car Navigation system can't find the network, here are a few things to check: * Ensure Wi-Fi is enabled on both Wi-Fi devices and rescan available networks, as Wi-Fi may not be currently enabled on devices. * Power cycle / reboot devices and rescan available networks, because some devices may automatically turn off Wi-Fi when not in use to save power. * Try to enable broadcasting of the device’s network using the Wi-Fi settings on the device you are trying to connect to, in case the device is not broadcasting. * Move devices closer together or, if possible, remove the obstructions and then rescan available network, because devices might be out of range or signal being blocked.
N
Nancy OrtegaSep 6, 2025
Why is the Raymarine Car Navigation mobile app running slowly?
- O
  Olivia ClarkSep 6, 2025
  If the mobile application is running slowly or not at all with your Raymarine Car Navigation system: * Install the mobile app from the relevant app store, if the Raymarine app is not installed. * Ensure both the mobile app and MFD software are the latest available versions, as the Raymarine app version might not be compatible with the MFD software. * Enable “Viewing only” or “Remote Control” as required in the Mobile Apps setting on your MFD, because mobile apps might not be enabled on the MFD.