Raymarine AXIOM Series - Axiom 7 Flush and Surface Mounting; Removing the Trunnion Adaptor Axiom 7; Surface or Flush Mounting Axiom 7 Only

3.4Axiom7flushandsurfacemounting
R
emovingthetrunnionadaptorAxiom™7
ThetrunnionadaptorsuppliedfittedtotheAxiom™7canberemovedtoenabletheadaptortobe
usedasaclampforsurfaceandflushmountinstallations,theadaptormustalsoberemovedbefore
installationtheunitusingtheRearmountbracketsorFrontInstallationkit.
1.Unscrewthe4xM5 x16screwsusinga4mmhexwrench(Allenkey).
2.PullthetrunnionadaptorawayfromtheMFD.
SurfaceorFlushmountingAxiom™7only
Whensuitableaccessisavailablebehindthedesiredmountingsurface,theMFDcanbesurfaceor
flushmounted.
First,ensureyouhaveremovedtheTrunnionadaptorfromtherearoftheMFD.
Installation33