Raymarine E70372 - Powering down Your Radar; Putting the Radar into Standby

S
tandby(Nottransmitting)
Ifthe‘S tandby’messageisdisplayedthenselect Transmittobegintransmitting.
Transmitting
IfyourR adarscannerisconnected,poweredupandtransmittingthentheRadarimageisdisplayed
andechoes/targetsaredisplayedonscreen.
PuttingtheRadarintoStandby
WithyourselectedRadardisplayedonscreen:
1.SelectTransmitfromthemainmenu.
TheRadarscannerwillstoptransmittingandisputinto
Standbymode.
PoweringdownyourRadar
WithyourRadarscannerinStandby:
1.Selectthe Officon.
2.Select
Yestoconfirmpowerdown.
TheRadarscannerwillstillconsumeasmallamountofpowerwhilstitispoweredoff,thisisto
ensuretheRadarcanbepoweredbackup.
R adarapplication
115