Raymarine EVOLUTION ACU-400 - User Manual

EVOLUTION AUTOPILOT
EV-1 / ACU-100 / ACU-150
ACU-200 / ACU-300 / ACU-400
インストール方法
English (en-US)
Date: 08-2021
Document number: 87180 (Rev 6)
© 2021 Raymarine UK Limited

Raymarine EVOLUTION ACU-400 Specifications

General

Type	Autopilot Control Unit
Drive Output Current	10 A
Waterproof Rating	IPX6
Humidity	Up to 95% non-condensing
Compatibility	Raymarine EVOLUTION autopilot systems
Supply Voltage	12V or 24V DC
Sensor Connections	SeaTalkng, NMEA 2000
Communication Interface	NMEA 2000, SeaTalkng

Summary

ACU-100; ACU-150 Connections

ACU-100, ACU-150 Connections Overview

Overview of connecting ACU-100 and ACU-150 units to the system.

ACU-200, ACU-300, ACU-400 Connections

ACU-200, ACU-300, ACU-400 Connections Overview

Overview of connecting ACU-200, ACU-300, and ACU-400 units to the system.

Pilot Controller Connections

SeaTalkng Pilot Controller Connection

How to connect a SeaTalkng pilot controller to the EV autopilot.

SeaTalk Pilot Controller Connection

How to connect a legacy SeaTalk pilot controller via a converter.

System Checks and Troubleshooting

Post-Installation Checks

Checks to perform before initial operation after installation.

Error Messages and Troubleshooting

Displays error messages and troubleshooting steps for the autopilot system.

Autopilot System Setup

Alarms

Rudder Damping and Deadband Angles

Operation

Evolution Autopilot Operation Instructions

Detailed instructions for operating the Evolution autopilot system.

Maintenance

Service and Maintenance

Information on product service, maintenance, and repairs by authorized dealers.

Routine Equipment Checks

Technical Support

Raymarine Product Support and Servicing

Technical Specification

EV-1 and EV-2 Technical Specification

ACU-100, ACU-150 Technical Specification

ACU-200, ACU-300, ACU-400 Technical Specification

Spares and Accessories