Need help?Do you have a question about the Raymarine E70099 and is the answer not in the manual?
General| Brand | Raymarine |
|---|---|
| Model | E70099 |
| Category | Autopilot System |
| Language | English |
Covers critical safety advice for installation and operation, including power, grounding, and environmental hazards.
Guidelines for cleaning, service policy, water ingress, general disclaimers, and EMC suppression ferrites.
Information on product disposal according to WEEE Directive and compliance statements.
Details on warranty registration, SOLAS compliance, and technical accuracy of documentation.
Information on the handbook's purpose, applicable products, and related documentation.
References for installation and operation documents for autopilot controllers and drive units.
Explanation of document conventions and notes on illustrations potentially differing from actual products.
Description of Evolution autopilot system, features, components, requirements, and network protocol.
Diagrams illustrating minimum and recommended system configurations for ACU units.
Lists compatible Raymarine autopilot controllers for the Evolution system.
Details compatible hydraulic, mechanical, and power-assisted stern drive units for autopilot systems.
Information on how to update product software for performance improvements and new features.
List and illustration of parts supplied with EV-1 and EV-2 sensor units.
List and illustration of parts supplied with ACU-100, ACU-150, ACU-200, ACU-300, and ACU-400.
Diagram showing physical dimensions of the EV-1 and EV-2 sensor units.
Diagram showing physical dimensions of the ACU-100 and ACU-150 units.
Diagram showing physical dimensions of the ACU-200, ACU-300, and ACU-400 units.
List of installation activities and importance of schematic diagrams for planning and maintenance.
Guidelines for selecting an installation location for the EV-1 and EV-2 sensor, including warnings.
Guidelines for selecting an installation location for the ACU units.
Ensuring adequate distance from compasses and recommendations for minimizing electromagnetic interference.
Instructions for surface and bracket mounting the EV-1 sensor unit.
Instructions for mounting the ACU-100, ACU-150, ACU-200, ACU-300, and ACU-400 units.
Reference to dedicated installation instructions for specific autopilot drive units.
Guidelines for cable types, length, routing, strain relief, and shielding for proper installation.
Overview of EV-1/EV-2 connection ports and instructions for connecting SeaTalkng cables.
Details on EV-1 power connection via SeaTalkng and optimal power connection points for systems.
Recommendations for SeaTalkng power distribution, system loading, and breaker ratings.
Overview and guidance for connecting components to the ACU-100 and ACU-150.
Instructions for connecting power to the ACU-100 and ACU-150 units, including circuit protection.
Importance and method of connecting grounding, and recommendations for ACU power distribution.
Electrical considerations for planning cable runs and selecting appropriate power and drive cables.
Instructions for connecting the drive motor to the ACU-100 and ACU-150.
Instructions for connecting the ACU-100 and ACU-150 to the SeaTalkng backbone.
Importance and method of connecting a rudder angle reference sensor to the ACU for improved performance.
Overview of connection ports for ACU-200, ACU-300, and ACU-400 units.
Instructions for connecting a legacy SeaTalk pilot controller via a SeaTalk to SeaTalkng converter.
Checks to perform after installation and before commissioning the autopilot system.
Importance of proper commissioning and initial power-on test for system setup.
Adjusting rudder damping and deadband angles for optimal autopilot performance.
Explanation of autopilot system alarms, their possible causes, and solutions.
Meaning of LED status indications on the EV-1 unit and required actions.
Meaning of LED status indications on the ACU unit and required actions.
Reference to documentation for operating the autopilot system via control units like p70s or MFDs.
Information on service policy, recommended routine checks, and best practices for product cleaning.
Information on accessing Raymarine support, warranty, service, and repair information.
Information on available learning resources like video tutorials, galleries, and training courses.
Detailed technical specifications for the EV-1 and EV-2 sensor units, including voltage, sensors, and dimensions.
Detailed technical specifications for the ACU-100 and ACU-150 units, including drive output, connections, and environment.
Detailed technical specifications for ACU-200, ACU-300, ACU-400 units, including drive output, clutch, and connections.
List of available spare parts for the Evolution autopilot system, including cable kits and mounting hardware.
List of various SeaTalkng cables and accessories for compatible products, including starter and backbone kits.
To Next Page