Raymarine Marine GPS System - Page 121

RayTech Navigator User’s Guide
5-30
Deleting a MARPA Target
To remove a target from the Marpa database:
1. Click MARPA on the Functionbar.
2. Click MARPA List. The Marpa database is displayed.
3. Select a target from the list, and then click Delete to
remove the selected target.
or
1. Click the right mouse button.
2. Select MARPA > Clear.
3. Click the left mouse button on the selected target to
remove it from the screen.
Using the MARPA Dialog Box
The MARPA dialog box (Figure 5-10) displays setup information and
data specific to the individual targets. You can also acquire, delete,
and display a list of targets, and you can toggle the MARPA dialog
box on/off using the Marpa/MARPA Box: On/Off button.
Figure 5-10. Radar MARPA Dialog Box