RayTech Navigator User’s Guide
5-4
Displaying the Control Panel
You can display a Control Panel dialog box on the outside of the radar
window, which enables you to modify a number of radar settings.
To display the Control Panel:
1. From within the Radar Window, click the right mouse button.
2. Select View/Control Panel. The Control Panel (Figure 5-1)
is displayed along the side of the radar window.
3. Click the right mouse button and select View/Control Panel
again to toggle the Control Panel off. The box disappears
and the size of the radar window is maximized.
Figure 5-1. Radar Control Panel
To Next Page
Loading...
