Raymarine Marine GPS System - Page 62

RayTech Navigator User’s Guide
3-32
Keyboard Tab
The Keyboard tab of the Customize dialog box enables you to
associate keystroke shortcuts to commonly-used commands in
Navigator. For example, to display the Layers dialog box, you might
assign the keys Ctrl+L. Then, each time you press that sequence of
keys, the Layers dialog box appears.
To associate keystrokes with commands:
1. From the View menu (or right-click near the Toolbar display
area), select Customize to display the Customize dialog box.
2. Click the Keyboard tab (Figure 3-47).
3. From the Category drop-down menu, select the menu that
contains the command you want to create a shortcut for.
4. In the Press New Shortcut Key window, type the key
sequence you want to represent the command.
5. Click Assign to complete creating the shortcut.
Figure 3-47. Customize Dialog Box Keyboard Tab
S
TEP
1
.
Select the
drop-down menu
that contains the
command you want
S
TEP
2
.
Highlight
the command you
want to shortcut
TIP:
Scroll down and
select All Commands to
display all commands
S
TEP
4
.
Click
Assign
S
TEP
3
.
Type key sequence